Protection on mobile devices has been an important piece throughout the last few years. Protecting the screen is essential, especially knowing that it is the most used element of a phone, since if it fails we will have no other option than to change this element in a store.
Cases and screen protectors don’t come at a high priceIn addition, thanks to them we can keep our smartphone as long as if they were new. Protect from a scratch, a fall and even liquid, as well as any accident that the mobile device may suffer.
The protections also have their problems if they are not installed well, so it is best to adapt it once we acquire it, either by you or by a professional. In this tutorial we explain how to remove bubbles from mobile phone screen protector in a few steps.
Related article: Hydrogel vs tempered glass screen protector: which one to choose?
Gel protector gains weight over other protectors
Today we have several options when it comes to protecting the phone screenAmong them, one that has been gaining ground in recent years is tempered glass. This film is quite strong, although it makes the device thicker and has great durability.
The gel protector is quite cheap and they protect a lot the devices, whether from scratches or even liquid that falls accidentally. Depending on the fall, it will be supported or not, but it is true that even resistant terminals usually have a resistance depending on the height.
Finally, silicone covers and those created with a different material are usually ideal, but not in summer where temperatures are excessive. The former are incorporated for your conveniencethey also tend to have a greater grip to the touch, something that does not happen with leather covers.
Reasons why the bubbles come out
Phone panels tend to pick up quite a bit of dirt since hands they usually always contain fingerprints, as well as possible bacteria. Dirt, after all, is not good in any way, so you should clean it before applying the gel cover.
A non-abrasive liquid is recommended for screens of this type, not just any and it is recommended that you buy it at a specialized phone or computer store. The indicative price is between 3 to 6 euros and the amount may vary depending on the company that distributes it.
The chamois will help you when cleaning these panels, with a cloth you will remove any type of dirt, but it does not do it in depth. Pass the chamois from end to end, leaving no trace for placement, otherwise bubbles will appear after placing the gel.
Remove bubbles from a screen saver
It is quite common for this to happen when we install a gel film on the screen, although its removal is sometimes due to taking in air in the process. This is usually removed if you pass a dry cloth, although this does not happen if it has a little dirt, which means that it does not stick completely.
With the passage of time it is normal that it should be replaced due to wear, but seeing its cheap price it is up to it to be replaced by mounting another new one. This film is for a cost between 3 to 10 euroscoming in one or several units when buying them.
To remove the bubbles after installing itDo the following:
- If you have already mounted it on the clean screen, use a card that is plastic and does not bend, paper ones are not valid
- Pass this through the areas where the bubbles have been created, you can use one of its picks to drag it and remove it
- If the bubble has expanded, it is best that you arrive to use the card from the central part and dragging the big bubble to the corner and completely removing it
- Go doing this with each of the bubbles created until its elimination, it is important that none remain so that it can fully protect
Use other elements to make the bubbles disappear
There are various materials that will serve for the disappearance of bubbles in screen protectors, including for example oil. In this case, you can choose any type, although if it has a larger body, it will help the gel to better absorb the screen of the device.
You also have other materials such as adhesive tape to use and remove the air formed between those bubbles, put a little of it and pull from the bottom to the top. It is usually used that does not leave any trace, in order to use the gel film once all bubbles have been removed from it. It is advisable to use a Scotch Tape type, which does not usually leave any trace when used on any material, including gel.
A dry cloth is also an important tool, just pass it over to be able to remove each of the bubbles that appear. The gel protector or the plastic sheet sometimes do not stick correctly because a material with which it is correctly implemented is not initially passed.
Remove the protector and put another one from the beginning
If you try all of the above and cannot, the best thing is to replace it with a gel sheet, are the ones that last the longest, since the plastic ones must be replaced every few months. The gel is a component that will withstand many clicks, as well as adapt quickly to any phone, depending on the dimensions.
When placing it, go from corner to corner stretching each part and passing a cloth next to the glued surface, with this you will make sure that there are no bubbles left. It is also advisable to pass a card at the end if it is convenient so that everything is well glued and attached to the screen.